System components
Loudspeaker enclosures
X4i
2-way passive coaxial enclosure: 4'' LF + 1.4'' HF diaphragm
Syva Sub
Infra low frequency subwoofer: 1 x 12'' LF
SB10i
Ultra-compact subwoofer: 1 x 10" (installation version)
Refer to the Syva user documentation for information on using Syva Sub.
Powering and driving system
LA2Xi / LA4X / LA8 /
Amplied controller with DSP, preset library and networking capabilities
LA12X
Refer to the LA2Xi / LA4X / LA8 / LA12X owner's manual for operating instructions.
Cables
2 × 2.5 mm² cable
speaker cable with bare wire endings
Adapt the cable length to the installation.
custom 2-point
2-point speakON cable (2.5 mm² gauge) to bare wire cable
speakON cable
This cable needs to be custom made.
Information about the connection of the enclosures to the LA amplied controllers is given in
this document.
Refer to the LA2Xi / LA4X / LA8 / LA12X owner's manual for detailed instructions about the whole cabling
scheme, including modulation cables and network.
Rigging elements
X-U4i
Adjustable U-bracket for X4i
X-B4i
Base plate and bracket for X4i
Transportation accessories
L-Case
2U Electronics transport and protection case
Software applications
Soundvision
3D acoustical and mechanical modeling software
LA Network Manager
Software for remote control and monitoring of amplied controllers
Refer to the Soundvision help.
Refer to the LA Network Manager help.
X4i owner's manual (EN) version 4.0
System components
9