Reducing Or Enlarging A Copy; Automatic Ratio Selection; Manual Ratio Selection (Preset Copy Ratios/Zoom) - Sharp AR-M162 Operation Manual

REDUCING OR ENLARGING A COPY

There are three ways to enlarge and reduce copies:
• Automatic selection of a ratio according to the paper size: Auto ratio selection
• Specifying a ratio from 25% to 400%: Preset ratios/zoom
• Selecting the vertical and horizontal ratios separately: XY zoom
When the SPF is being used, the zoom copy ratio range is 50% to 200%.
Note

AUTOMATIC RATIO SELECTION

1
Place the original in the document
feeder tray or on the document glass.
The original size will appear in the display. If the
correct size does not appear, see "SELECTING THE
ORIGINAL SIZE" (page 50).
Automatic ratio selection can be used when
Note
the original size is 11" x 17", 8-1/2" x 14",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2", A3, B4, A4, A4R and A5. It
cannot be used for other sizes.
2
Press the [PAPER] key to select the
desired tray.
If the bypass tray is selected,
automatic ratio selection cannot
OPY EXPOSURE PAPER ZOOM AUTO
be used.
CAN COLOR MODE RESOLUTION ADDRESS FORMA
FAX PROGRAM RESOLUTION ADDRESS BROADCA

MANUAL RATIO SELECTION (PRESET COPY RATIOS/ZOOM)

1
Place the original in the document
feeder tray or on the document glass.
52
3
Press the [AUTO%] key.
PER ZOOM AUTO % OUTPUT DUPL
OLUTION ADDRESS FORMAT ORIGINAL SIZE DUPLEX
ORIGINAL SIZE
OLUTION ADDRESS BROADCAST DUPLEX
• The copy ratio will be automatically set.
• If the original and paper are in different orientations,
the image is automatically rotated to match the paper
orientation (rotation copy). However, if enlargement is
selected for copying onto a paper size larger than
8-1/2" x 11" (A4), the image will not be rotated.
• Rotation of the image can be disabled in the key
operator programs when reducing or enlarging a
original. (See the "Key operator's guide".)
• If the message "Image edge loss." is displayed, part
of the original image may be cut off.
4
Set the number of copies and press
the [START] key (
WXYZ
• To cancel automatic ratio selection, press the
[AUTO%] key again.
• When copying from the SPF, automatic ratio
selection mode will automatically disable after the
[START] key is pressed and the original is scanned.
2
Press the [ZOOM] key.
SURE PAPER ZOOM AUTO % OUTP
R MODE RESOLUTION ADDRESS FORMAT ORIGINAL
ORIGINAL
GRAM RESOLUTION ADDRESS BROADCAST
Copy ratios that can be
selected will appear.
).
ZOOM
121%
100%
95%
ZOOM
100%