Scan Mode (Base Screen) - Sharp AR-M162 Operation Manual

HOW TO USE THE NETWORK SCANNER FUNCTION

SCAN MODE (BASE SCREEN)

The base screen of scan mode is displayed by pressing the [SCAN] key from the base screen of copy mode, print
mode, or fax mode.
If a screen appears asking you what type of connection you are using after you press the [SCAN] key, select
Note
"NETWORK" with the [
Base screen of scan mode
(1) Message display
Messages appear here to indicate the current
status of the machine.
(2) Destination display
This shows the selected destination.
There are four scanner transmission modes:
Scan to E-mail, Scan to FTP, Scan to FTP
(Hyperlink), and Scan to Desktop.
This shows the currently selected destination and
transmission mode.
(3) Color mode display
This shows the currently selected color mode for
scanning.
(4) File type display
This shows the image data file type to be created.
18
] or [ ] key and press the [OK] key.
Ready to scan.
( 1)
XXXXX
( 2)
COLOR
( 3)
PDF MULTI
( 4)
8 x11
1
( 5)
2
( 6)
150dpi
( 7)
( 8)
(5) Original display (page
This displays an icon to indicate the original
scanning mode when an original has been
placed.
: One-sided scanning in the SPF.
: Document glass
: Two-sided scanning in the RSPF.
The size of the original is also displayed.
(6) Transmission mode display
When appears to the right of the icon, the [
key can be pressed to show a list of the currently
selected destinations.
A destination can also be deleted in this screen.
(7) Resolution display
The shows the scanning resolution.
(8) File creation display
This shows the currently selected file creation
method.
26)
]