Sharp AR-M162 Operation Manual page 261

(2)
COPY EXPOSURE PAPER ZOOM
SCAN COLOR MODE RESOLUTION ADDRESS
FAX PROGRAM RESOLUTION ADDRESS BROADCAST
(10) (11) (12) (13) (14) (15)
(13) [FORMAT] key (page
When you send an image to one or more
recipients using Scan to E-mail or Scan to FTP,
the [FORMAT] key enables you to temporarily
override the individual file format settings (file
type / compression mode) stored for each
recipient and send the image to all of the
recipients using a single file format setting.
(14) [ORIGINAL SIZE] key
This is used to set the size of the original to be
transmitted.
(15) [DUPLEX SCAN] key
Press this key to use the duplex scan function.
(when the RSPF is installed)
(16) [SPECIAL FUNCTION] key
This key is used to select a special transmission
function, configure function settings, and access
the key operator programs.
(3)
FAX STATUS
BACK OK
AUTO % OUTPUT DUPLEX
SPECIAL FUNCTION
FORMAT ORIGINAL SIZE DUPLEX SCAN
ORIGINAL SIZE DUPLEX SCAN
(16) (17)
28)
(page 26)
(page 25)
HOW TO USE THE NETWORK SCANNER FUNCTION
(4) (5)
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
@.- _
ACC. #-C READ-END
(18)
(17) Arrow keys (
These are used to select items and move through
pages.
(18) [START] key (
This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When configuring and storing settings
• When the auto power shut-off function
Note
activates, all lights except the mode key
indicators go off. For information on auto
power shut-off, see the "Operation
manual (for general information and
copier)".
• For information on the keys and indicators
which are used for the copy function and
other functions, see "OPERATION
PANEL" in the manual for each function.
(6) (7)
)
)
2
17