Sharp AR-M162 Operation Manual page 198

11
To finish the storing procedure, press
the [START] key (
program an option such as F-code,
chain dialling, transmission speed, or
international transmission mode,
press the [OK] key.
• If you pressed the [START] key (
5. If you wish to program another Rapid key or
Speed Dial number, repeat steps 5 to 11. To
exit, press the [BACK] key. Editing to that point
will be completed.
• If you pressed the [OK] key, go to the
appropriate page for the option that you wish to
edit. To program F-code settings, follow the
steps in "F-code settings" on pages 64 and 65.
To select "CHAIN DIAL", go to "Chain Dialling"
on page 65. To set the "TRANSMISSION
SPEED", go to "Transmission speed setting" on
page 66. To set the "INTERNATIONAL
TRANSMISSION MODE", go to "International
transmission mode setting" on page 66.
● Deleting a Rapid key or Speed Dial number
1
In step 3 on page 68, select "DELETE"
with the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
2
Press a Rapid key ([01] to [50]) or the
[SPEED] key.
• To delete a Rapid key, press the Rapid key that you
wish to delete ([01] to [50]).
26 27 28 29 30
A B C D E
31 32 33 34 35
F G H I J
36 37 38 39 40
K L M N O
• To delete a Speed Dial number, press the [SPEED]
key and then enter the Speed Dial number (000 to
299) that you wish to delete with the numeric keys.
47 48 49 50
V W XYZ SP
REDIAL/PAUSE SPEED COMM. SETTING
SYMBOL SPACE/–
). If you wish to
), go to step
RAPID/SPEED
CHANGE
DELETE
3
Select "DELETE" with the [ ] or [ ]
key.
If you select "NO DELETE", you can press
Note
the key to check the destination name. If
you are deleting the destination, check the
destination name and then delete the
destination.
4
Press the [OK] key.
You will return to the screen of
step 2. If you wish to delete
BACK OK
another Rapid key or Speed
Dial number, repeat steps 2 to
GHI
4. To exit, press the [BACK]
key.
[Editing and deleting group keys]
To edit or delete a group key, follow steps 1 through 6
on pages 62 to 63 and then follow the steps below.
A group key cannot be edited or deleted in
Note
the following cases.
• The group key is stored in a program or
F-code relay group.
● Editing a group key
1
Select "GROUP" with the [ ] or [ ]
key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
2
Press the [OK] key.
BACK OK
GHI
PROGRAMMING
SBC CO.
DELETE
NO DELETE
[#]:DETAIL
CHANGE/DELETE
RAPID/SPEED
GROUP
69
6