Sharp AR-M162 Operation Manual page 339

8
If you wish to install Button Manager
or Sharpdesk, click the [Utility
Software] button in step 5.
If you do not wish to install either, go to step 10.
9
Click the [Button Manager] or
[Sharpdesk] button.
• To view information on the software, click the
[Display Readme] button.
• Follow the on-screen instructions.
10
Click the [Close] button.
After the installation, a message prompting
Note
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.
11
Connect the machine to your
computer with the USB cable. (Page
44)
Make sure that the machine is powered on. The
machine is found and a plug and play window
appears. Follow the on-screen instructions.
If you are using Windows 2000
Caution
If a warning message regarding the digital
signature appears, be sure to click the [Yes]
button.
If the dual function board is installed, the
Note
"AR-XXXX (EB)" printer driver and scanner
driver will be installed.
This completes the installation.
• If you installed the MFP Driver, see "CONFIGURING
THE PRINTER DRIVER" (page 42) to configure the
printer driver settings.
• If you installed Button Manager, see "SETTING UP
BUTTON MANAGER" (page 18) to set up Button
Manager.
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
1
13