Sharp AR-M162 Operation Manual page 208

[EDITING AND DELETING F-CODE RELAY
GROUPS]
9
Select "CHANGE" or "DELETE" with
the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
10
Press the [OK] key.
BACK OK
GHI
• If you selected "CHANGE" in step 9, follow the steps
in "Editing an F-code relay group" which follows.
• If you selected "DELETE" in step 9, follow the steps
in "Deleting an F-code relay group" which follows.
● Editing an F-code relay group
11
Select the name of the F-code relay
group (box) that you wish to edit with
the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
If not all letters of the box name appear, press the
key to display all letters. Press the
to return to the original screen.
12
Press the [OK] key.
BACK OK
GHI
13
Edit the name of the F-code relay
group (box) (see "ENTERING
CHARACTERS" on page 82).
• See step 9 on page 76.
• If you do not wish to edit the name, go to the
next step.
S.A. RELAY GRP
CHANGE
DELETE
S.A. RELAY GRP
SBC CO.
— — — — — —
— — — — — —
[#]:LIST DETAIL
key once again
14
Press the [OK] key.
OK
15
Edit the sub-address and passcode
(maximum 20 digits) with the numeric
keys.
• See steps 3 to 6 on page 65.
• If you do not need to edit the sub-address and
passcode, press the [OK] key and go to the
next step.
16
Edit the relay destinations.
See steps 13 to 15 on page 76.
● Deleting an F-code relay group
11
Select the name of the F-code relay
group (box) that you wish to delete
with the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
If not all letters of the box name appear, press the
key to display all letters. Press the
to return to the original screen.
12
Press the [OK] key.
BACK OK
GHI
13
Select "DELETE" with the [ ] or [ ]
key.
14
Press the [OK] key.
You will return to step 11. If you
OK
wish to delete another relay
group, repeat steps 11 through
14. To exit, press the [BACK]
key.
PROGRAMMING
S.A. RELAY GRP
SBC CO.
— — — — — —
— — — — — —
[#]:LIST DETAIL
key once again
79
6