Key Operator Programs; Key Operator Program List - Sharp AR-M162 Operation Manual

4

KEY OPERATOR PROGRAMS

The key operator programs allow the administrator of the machine (key operator) to enable and disable functions to
suit the needs of the workplace. This chapter explains key operator programs for the printer and scanner functions.
For key operator programs that are common to all modes, see the "Key operator's guide".
For the initial key operator code set at the factory, see "PROGRAMMING A KEY OPERATOR CODE" in the "Key
operator's guide".

KEY OPERATOR PROGRAM LIST

The key operator programs for the printer and scanner functions are shown in the following table. Factory default
settings are indicated in bold. When "ENABLE, DISABLE" appears in the "Settings" column of a program, the
program is enabled by pressing the [OK] key so that a checkmark appears in the checkbox. A checkmark in the
checkbox ( ) indicates that "ENABLE" is selected. No checkmark (
Mode
Printer NOTICE PAGE
FORCED OUTPUT OF
PRINT
Scanner DISABLE USB SCAN
26
Program Settings
ENABLE, DISABLE
ENABLE, DISABLE
YES, NO
) indicates that "DISABLE" is selected.
Explanation
Select whether or not a Notice Page
30) is printed when printing is not successful
due to a memory full (or other) error.
When no tray has the specified size of paper,
this setting is used to select whether or not
the print job will be printed on the closest size
of paper.
Select whether or not scanning from a
computer and scanning from the machine are
disabled when a USB connection is used.
When "YES" is selected, USB scanning is
disabled.
(page