Table of Contents
Advertisement
Electric dispenser EWL 15, 30
A 7 Controls and functional elments
@ Hook
" Fixing holes
# Console 15/30
£ Electromagnet
fi Locking bolt
Ì Power plug
\ Bracket
| Cover
· Dispenser
¯ Plaster dispenser funnel
» Clamp connection
„ Function switch
A 8 Operation
Hold the bowl under the dispensing tunnel
ˇ Press the switch „ in the direction of the
arrow and remove the required amount of
plaster.
The container · can be replenished with
plaster either in its mounted position or
when removed.
Removing the container ·. Push the con-
tainer · upwards by about 80 mm and
withdraw forwards in the direction of the
arrow.
Prevent the dispersal of dust
particles when filling, i.e. this should
be carried out directly over the container.
Re-fill with plaster and hang the dispenser
9 back on to the console 3.
When re-hanging, observe the correct
positioning of the three locating pins 5.
Replace the lid after filling, otherwise there
is a danger:
• of dust particles escaping,
• or the ingress of foreign bodies into the
contents.
7
Advertisement
Table of Contents
