A 1 User Information; A 1.1 Meaning Of The Pictograms; A 1.2 Important Information; A 1.3 Precautions - KaVo EWL 15 Operating Instructions Manual

Electric dispenser EWL 15, 30

A 1 User information

A 1.1 Meaning of the pictograms

Situations where failure to follow the
instructions may lead to danger,
damage to material or operating faults.
Important information for operator
and engineer.
Automatic mode
Automatic sequence
Close, screw in, fasten, etc.
Open, release, loosen
+ +
more, higher
- -
less, lower
∞
Continuous operation
Time, time sequence
Disconnect mains plug

A 1.2 Important information

The instructions for use should be read
by the user before starting up the unit
for the first time, in order to avoid incorrect
operation and other damage. If other language
versions are required, please request these
from your responsible KaVo agent. Dupli-
cation and distribution of the instructions
for use (IU) require KaVo's prior consent.
All technical data, information and properties
of the product described in the IU correspond
to the state on going to press. Modifications
and improvements to the product as a result
of new technical developments are possible.
This does not imply any right to retrofitting
of existing units.
KaVo assumes no responsibility for damage
arising through:
• external influences (poor quality of the
media or inadequate installation)
• use of incorrect information
• improper use
• improperly performed Repair and
maintenance work.
Repair and maintenance work - apart from
the activities described in these instructions
for use - may be performed only by qualified
technical personnel.
In the event of modifications by third parties,
the approvals become null and void. KaVo
recommends using only original spare parts
for operation and for repair.
2

A 1.3 Precautions

Safe operation and care of the product can
be achieved only by use in accordance with
the operating instructions. In addition, the
following should also be observed:
• Safety at Work regulations,
• The safety and handling instructions of
the materials manufacturer,
• Prevention of Accidents regulations.
According to these regulations it is the duty
of the user:
• to use only flawless materials,
• to observe correct usage and applications,
• to wear personal protective devices, such
as face masks and safety glasses.
In situations of poor condition of the equip-
ment, or improper applications such as, for
example;:
• use of the unit for purposes for which it is
not designed,
• using non-approved materials,
• insufficient upkeep of the installation
(wear, contamination, non-observance of
the maintenance procedures, etc.)
there exists the danger of personal injury,
or the jeopardizing of materials and equip-
ment as a result of:
• unintentional dropping down of a plaster
dispenser,
• blockage of the dispensing funnel.