Table of Contents
Advertisement
Electric dispenser EWL 15, 30
A 9 Care and maintenance
Repair and maintenance work on the
electrical parts of the unit must be
carried out only by qualified service
technicians, or trained personnel who are
familiar with the safety regulations. Before
any work is started, the mains plug must be
pulled out, or the unit completely
disconnected to ensure no electricity is
flowing to the unit.
Check movement of function switch w. If
required, clean the sliding surfaces and re-
grease with molycote paste.
At regular intervals (e.g. when refilling the
dispenser); check console 3 for correct
anchorage on the wall.
Check clamping device q for free
through-flow.
Cleaning
When cleaning , prevent any ingress
of water into the unit.
Wipe away any dirt on the outside with a
damp cloth
8
Advertisement
Table of Contents
