Table of Contents
Advertisement
24 | CR Mammography | Introduction to the CR Mammography System
Viewing conditions for softcopy
The suggested settings for softcopy viewing are:
• An overview of the new study, presenting a proper hanging protocol.
• If you can consult prior studies, an overview of both new and prior studies.
• A one-on-one comparison view of images (e.g. right and left CC, left CC
and left MLO,...).
Other settings should be discussed by the customer with the Agfa
mammography application specialist.
2344Q EN 20180406 1001
Warning: Good viewing conditions are essential for the
correct interpretation of the diagnostic mammography
images
Caution:
Viewing conditions (ambient light) should not be changed after
initial monitor calibration and alignment:
• Other light sources should not be directed towards the
displays of the softcopy station.
• Ambient lighting must be as low as possible.
• Glare must be minimized.
Caution: The viewing conditions must remain stable at all times.
Therefore it is recommended to perform a regular check of all
viewing conditions.
Advertisement
Table of Contents
