Table of Contents
Advertisement
CR Mammography | Introduction to the CR Mammography System | 17
Installation of the CR Mammography System
The Agfa mammography application specialist configures all components of
the CR Mammography System.
Following remarks/instructions should be taken into account when installing
the CR Mammography System:
Topics:
•
CR Digitizer
•
CR Workstation
•
Print Layouts
•
CR Mammography Printer
•
Diagnostic Workstation
CR Digitizer
After proper installation of the CR Mammography System, the mammography
scan mode on the Digitizer is activated automatically when a CR Mammo
image Cassette, correctly initialized and identified, is introduced into the
Digitizer.
CR Workstation
The CR Mammography Workstation software needs to be configured to
ensure that the mandatory:
• Scanning parameters will be provided for the Digitizer.
• Dedicated MUSICA
• The system allows adjustment to visualization preferences of local
departments.
• Valid examination tree with dedicated image processing settings is used.
The CR Workstation provides the possibility to achieve a consistent grayscale
perception of the images, as described in the DICOM standards (known as
Pvalues).
The configuration will also take care that images are displayed in the proper
orientation and mammography specific hardcopy film layouts are used.
Caution: When deviating from the recommended settings, Agfa
cannot guarantee optimal performance of the system.
TM
processing for mammography will be applied.
Note: It is important that the correct exam is selected to allow
application of the appropriate image processing.
2344Q EN 20180406 1001
Advertisement
Table of Contents
