Image Level Selection - Sanyo PLC WTC500AL Owner's Manual

Image Level Selection

1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Menu icon.
2
Use the Point buttons to move the red frame
ed
pointer to the desired image level and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
(This icon is displayed with the computer signal.)
Cinema
Picture mode adjusted with fine tone.
(This icon is displayed with the video signal.)
Image 1–4
For viewing with the user preset image level in the Image
Adjust Menu (see page 44).
Image Level Selection
7 8 buttons to move the red
Image Menu
Move the red frame pointer
to the desired image level and
press the SELECT button.
This will change to Cinema
mode icon with the video
signal input.
The selected image level is check marked.
Image Menu icon
41