Moving The Projector; Cautions In Handling The Projector - Sanyo PLC WTC500AL Owner's Manual

Safety Instructions

Moving the Projector

Use the hand grip when moving the projector.
Replace the lens cap and retract the adjustable feet to
prevent damage to the lens and cabinet when carrying.
When the projector is not in use for an extended period, put
it into a suitable case to protect the projector.
CAUTION IN CARRyING OR
TRANSPORTING THE PROjECTOR
– Do not drop or bump the projector, otherwise damages
or malfunctions may result.
– When carrying the projector, use a suitable carrying
case.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
– Do not put the projector in a case before it is cooled
enough.
– Do not transport the projector with a replacement lens
installed.

Cautions in Handling the Projector

Do not hold the lens when lifting or moving the projector.
Doing so may cause damage to the lens and the projector.
Care must be taken when handling the projector; do not
drop, bump, subject it to strong forces, or put other things
on the cabinet.
CAUTION
Projection lens is a motorized lens. Please note the
followings when using the projector.
l Do not touch the lens while it is moving as this
could cause injury to the fingers.
l Never allow children to touch the lens.
8
Do not hold the lens and the peripheral part.