Top Control - Sanyo PLC WTC500AL Owner's Manual

Top Control

q
w
e
r
t
y
u
i
q WARNING TEMP . indicator
– Lights red light when the projector detects an abnormal
condition or the filter cartridge is not installed.
Blinks red when the internal temperature of the
–
projector exceeds the operating range (pp.69, 79).
w LAMP 1 REPLACE indicator
Turn yellow when the life of the projection lamp1 draws
to an end. (pp.66-67 , 78)
e SHUTTER indicator
Light blue when the shutter is closed. (pp.77-79)
r ON/STAND-By button
Turn the projector on or off (pp.24–25).
t INPUT button
Select an input source (pp.34–35).
y LENS button
Enter the focus, zoom, and lens shift adjustment mode
(p.28).
ed7 8 (VOLUME +/–) buttons
u POINT
Select an item or adjust the value in the On-Screen
–
Menu (p.26).
Pan the image in Digital zoom + mode (p.47).
–
Adjust the volume level (Point 7 8 buttons) (p.29).
–
Part Names and Functions
i SELECT button
–Execute the selected item (p.26).
– Expand or compress the image in the Digital zoom
mode (p.47).
o WARNING FILTER indicator
Blink slow when the filter is being scrolled (pp. 54, 77).
–
Blink fast when the filter scroll is not working properly
–
or the filter cartridge is not installed (pp.62-63, 79).
Light orange when the clogging of the filter is
–
detected or the filter counter reaches a time set in the
timer setting, urging immediate filter/ filter cartridge
replacement (pp.62-63, 79).
!0 LAMP 2 REPLACE indicator
Turn yellow when the life of the projection lamp2 draws
to an end. (pp.66-67 , 78)
!1 POWER indicator
Light red while the projector is in stand-by mode.
–
– Light green during operations.
– Blink red during the cooling-off period.
– Blink green in the Power management mode or the
Shutter management mode(p.58).
!2 SHUTTER button
Close and open up the built-in shutter.(pp.28, 58)
!3 MENU button
Open or close the On-Screen Menu (p.26).
o
!0
!1
!2
!3
13