Image Adjustment - Sanyo PLC WTC500AL Owner's Manual

Image Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Adjust Menu icon.
2
Use the Point
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point buttons to adjust the setting value.
7 8
Contrast
Press the Point 7 button to decrease the contrast; press the
Point button to increase the contrast (from 0 to 63).
8
Brightness
Press the Point 7
the Point button to increase the brightness (from 0 to 63).
8
Color
Press the Point 7 button decrease the intensity of the color;
press the Point
8
(from 0 to 63).
Tint
Press the Point
7 8
proper color balance (from 0 to 63).
Color temp .
Use the Point
7 8
level (XLow, Low, Mid or High).
White balance (Red)
Press the Point button to lighten red tone; press the Point
7
button to deepen red tone (from 0 to 63).
8
White balance (Green)
Press the Point button to lighten green tone; press the
7
Point button to deepen green tone (from 0 to 63).
8
White balance (Blue)
Press the Point button to lighten blue tone; press the
7
Point button to deepen blue tone (from 0 to 63).
8
✔ Notes:
• When the White balance Red, Green, or Blue is
adjusted, the Color temp. level will change to "Adj. " .
• Tint cannot be selected when the video system is
PAL, SECAM, PAL-M, or PAL-N (p.36).
• Each input signal has different On-Screen Menu
display.
42
Image Adjustment
7 8 buttons to move the red
buttons to move the red frame
ed
button to decrease the brightness; press
button increase the intensity of the color
buttons to adjust the tint value to get a
buttons to select the desired Color temp.
*The figure below shows for video signal input.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
Use the Point
adjust the setting value.
Press the SELECT button at
this item to display other
items.
Press the SELECT button
here to display the previous
items.
buttons to
7 8