How To Operate The On-Screen Menu - Sanyo PLC WTC500AL Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
1
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
2
Use the Point
the Point
ed
menu.
3
Press the SELECT button to show the item data. Use
the Point
7 8
To close the On-Screen Menu, press the MENU button
again.
✔
Note:
• The selected item is not active until the SELECT
button is pressed.
26
buttons to select a Menu icon. Use
7 8
buttons to select an item in the selected
buttons to adjust the values.
Press the SELECT button here
to display previous items.
Press the SELECT button here
to display next items.
Top Control
Remote Control
MENU button
On-Screen Menu
Menu bar
Pointer (red frame )
Press the Point buttons
ed
to move the pointer.
Item
SELECT
button
Item data
Press the Point
buttons to adjust the
value.
Quit
Exit this menu.
MENU button
POINT buttons
SELECT button
POINT buttons
SELECT button
Menu icon
Pointer
(red frame )
7 8