Sanyo PLC WTC500AL Owner's Manual page 43

Sharpness
Press the Point button to decrease the sharpness of the
7
image; press the Point button to increase the sharpness
8
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to
7 8
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off ......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off ......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
✔
Notes:
• Progressive cannot be selected when 480p, 575p, or
720p is selected (p.36).
• Reset and Store icons will be displayed when more
than one adjustment is made.
Image Adjustment
43