Hdmi Setup - Eiki EK-130U Owner's Manual

HDMI setup

When the external equipment is connected to "HDMI" terminal, if the image is not projected
properly, please switch the settings of "Image" or "Sound" in "HDMI setup" menu.
1 Press the MENU button to display the screen
menu. Press  button to select the
"Setting" menu icon. Press the OK to enter
the submenu entry.
2 Press  button to select "HDMI setup"
and then press the OK button.
3 Press  button to select "Image" or
"Sound" to adjust.
4 Press  button to switch the item.
Image
64-940 ....... Select when the HDMI terminal of an external device (such as a blu- ray player) is
connected to the" HDMI" terminal.
0-1023 ...... Select when the output of an external device (such as a computer) is connected to
the "HDMI" terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected
to the "HDMI" terminal.
Sound
HDMI .......... Select when the HDMI cable is connected, the image and audio are transmitted,
and you do not need to connect the audio signal separately.
VGA ............ Select when the terminal output of an external device (such as a computer) is
connected to the "HDMI" terminal via a conversion cable or similar cable.
The sound will not be transmitted, the audio signal is input to "AUDIO IN" terminal.
HDMI EQ setup
MODE 0-3....Change the HDMI reception level according tp the AV sevice connected to the HDMI input
terminal. If noise appears in the image or the image does appear, change the settrinh
48
Setting
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Note:
HDMI option can be chosen onlu
in HDMI1 and HDMI2 channel.
Off
Eco
Off
Normal
Off
On