Setting; Direct Power On; Standby Mode; Eco - Eiki EK-130U Owner's Manual

The projector has "Setting" menu that allows you to set the other various functions described as
follows.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Setting", then press
the OK button.
2 Press button to select the item you
want to set, press the OK button.
3 Press button to adjust the item, then
press the OK button.

Direct power on

Enable the projector to be turned on
automatically just by connecting the AC
power cord to an outlet when this function
is set to On.
On
Start the projection immediately, enter
countdown display.
Off
Start up in the standby mode.

Standby mode

This function is available when operating the
projector via network.
Press button to select the item below:
ECO. –
Choose "Eco" to save power consumption

Normal–

Choose "Normal" to return to normal standby

Network–

Choose "Network" as network standby mode
LAN
х

ECO

√
Normal
х
Network *
х: No Control ∆: Power On command Only √: All commands are active
*х: Power On command is active with "Wake On LAN" software.
44

Setting

Remote
RS232C Keypad
Controler
∆ ∆
√ ∆
∆ ∆
Setting menu
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Direct power on
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Standby mode
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
∆
∆
∆
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On