pulse and SpO
based alarms under SpO
. In the top center of the
2
2
screen there are two alarms zones. The top one is related to the
signal of the sensor. This zone contains multiple alarms and
prioritization of these are described in section 5.4. If the device is
not on external provided power the Battery Mode turns on, the top
and bottom of the screen now show a red bar, and a warning pop-up
appears on the screen.
Below this zone there is a zone for the "check status" indication. See
the section 5.3 for further information on possible alarm events and
a description of these.
Figure 26: O
matic PRO 100 alarm zones
2
D 8.4.1.20 O
matic User Manual - IFU
54
2