Figure 22 - Warm Up time
When the warmup is completed, the second phase of the test will
commence and the following will happen:
•
'START IN' countdown is replaced by 'TIME LEFT' countdown.
•
The device beeps twice.
•
The 12 minutes (12M) Trend Graph resets.
•
Test log begin recording.
•
The 'Active Profile' change to the one used in the test profile. The
pre-defined test shows 'WALKING' in the top middle of the screen.
Note: If the User has changed a value from the pre-defined test
profile which is actively used, the profile name will turn
yellow while the test is running to indicate that the test is
customized.
D 8.4.1.20 O
matic User Manual - IFU
2
47