O2matic OMC PC-100 User Manual page 51

Figure 25 – Secure device attachment
Caution
The device must be fixed securely using appropriate
attachment equipment.
Note: The O2matic Pro 100 device use a standard T-slot bracket.
For more information regarding attachment please visit
www.o2matic.com
The mobility requirement of the pre-defined tests dictates that they
can and may be performed on battery power only.
If the battery reaches a 'Low Battery' charge state during the test, a
high intensity audio alarm will begin and 'Battery Fail' will blink in a
red font on the screen.
If this state occurs, stop the test and re-attach the device to
external power at once.
D 8.4.1.20 O matic User Manual - IFU
2
51