O2matic OMC PC-100 User Manual page 12

Figure 4: User interface O matic PRO 100 (Home Screen)
2
The O matic PRO 100 device will by default always provide
2
treatment. Therefore, the device "expects" input signal from the
pulse oximeter sensor, worn by the patient, and will start an alarm
immediately if there is no signal. To mute the alarm, press the Mute
button (G), and the alarm will be muted for 2 minutes. The light in
the button is lid to indicate that it is muted.
Note: Audible alarms are disabled in menus. O2matic PRO 100
returns back to home screen after 1 minute of inactivity.
Note: If above steps have been followed correctly and there is no
visible home screen, see the Service and Support section.
Note: O matic PRO 100 goes in to pause screen mode after 30
2
mins. Press any button to get back to the home screen.
D 8.4.1.20 O matic User Manual - IFU
12
2