treatment.
Note: The standard WALKING profile has 15 L/min Max O2 Flow,
while other profiles may have a much lower maximum O2 Flow.
Therefore, if the patient has not recovered adequately in the
recovery phase, the patient may experience a sudden drop in the O2
flow.
To stop a test already running, press "End test". The user is then
prompted to either Cancel (continue test) or Confirm to stop the
test. The completed part of the test is still logged even if the test
gets cancelled.
Note: When a running test is cancelled the RECOVERY period is also
cancelled and the previous Active Profile resumes right away.
Appropriate setup
The following figures show an appropriate setup for performing tests
involving walking as an example.
Caution
The test setup chosen by the medical staff must
protect:
D 8.4.1.20 O
matic User Manual - IFU
2
•
The patient from falling
•
The device from physical impacts
49