NOTE: The O
2
95/46/EC from and GDPR from 2018 (General Data Protection
Regulation) hence, all access to data logs and settings are protected
by physical as well as software related barriers. To gain access to
the USB flash on the device you must have the relevant physical
tools, and the administrator pin code. For more information about
the physical tool, visit
Warning
The exported files should only be edited by an
administrator that have extensive knowledge of the
device. Ignoring this can result in dangerous situations
for the patient.
To import settings or profiles:
a. Remove the screws of the USB hatch.
b. Connect your device to a computer/laptop via a USB 1.0 – 2.0
cable with Type A to Type B connectors.
c.
Enter the device's USB pin code on the device to unlock the USB
port.
d. Check device connections on your computer. It should be
showing up like any other USB device
e. Enter the USB drive
You will see the following files:
20
matic PRO 100 device complies with the EU directive
www.o2matic.com
D 8.4.1.20 O
matic User Manual - IFU
2