O2matic OMC PC-100 Quick Manual
Hide thumbs
Also See for OMC PC-100:
- User manual (77 pages) ,
- Quick manual (4 pages) ,
- Quick manual (4 pages)
Related Manuals for O2matic OMC PC-100
Summary of Contents for O2matic OMC PC-100
- Page 1 O2MATIC QUICK GUIDE Get started quickly with O2matic Applies to O2matic OMC PC-100 & PRO 100 with software version 1.6.2...
- Page 2 2. Apply the Nonin sensor on the finger of the patient. 3. Apply mask or nasal catheter. NOTE: Make sure the switch on the back of the device is turned on. O2matic PRO will turn on with the latest saved settings.
- Page 3 Change patient or profile 1. Press ”Patient”. 2. Check if the profile settings are correct - See figure 2. 3. You are now presented with the following options: a) New Patient - Create a new patient. The device will go through all of the settings for setting up a patient and finally creating it.
- Page 4 WALKING Used for 6 minutes walking test and other SpO2: 90 - 94% mobility tests. In this case, O2matic PRO 100 should be attached to a rollator and run in bat- Flow: 0 - 15 l/min tery mode. Adjusts oxygen flow faster.
Need help?
Do you have a question about the OMC PC-100 and is the answer not in the manual?
Questions and answers