Warning
Test should only be done with a fully charged battery.
Ignoring this and doing tests with a less than fully
charged battery may result in power down before test
conclusion.
Caution
Tests should only be performed under supervision by
medical staff.
NOTE: By factory default the device come with three tests:
•
The Six Minute Walking Test (6_MWT)
•
The Incremental Shuttle Walk Test (ISWT)
•
The Endurance Shuttle Walk Test (ESWT)
Each of these tests can be customised by the user. It is also possible
for the user to create additional tests. (see chapter 7.2)
Running a test:
A walking tests consists of three phases
•
Warm-up – shown as START IN
•
Actual test – shown as test name and TIME REMAINING
•
Recovery – shown as RECOVERY
To see a '6-minute walking test':
1. From the Home Screen select Admin Screen.
2. Select Tests.
3. Select "6_MWT".
44
D 8.4.1.20 O
matic User Manual - IFU
2