O2matic OMC PC-100 User Manual page 30

Figures 10a-e: Patient Creation Menu
When assigning a new patient, the operator needs to complete
instructions a – e, seen below:
c. Change the patient ID.
This can be done either by incrementing the patient ID by 1 OR
by typing a specific patient ID to accommodate for a hospitals
existing ID system.
Selecting "Accept" to increment patient ID by 1.
OR
Select "Edit" and use
enter desired ID.
You can select "Clear" to clear the patient ID if needed.
30
and buttons to manually
D 8.4.1.20 O matic User Manual - IFU
2