Figure 921 - Test Setup
The WALKING profile has a 'FAST' Flow Response and Max Pulse
Rate of 150 bpm, to support physical exertion. For a list of factory
pre-set profiles, see table A5 in Appendix A.
To start the test, place the cursor on 'Start Test' in the top and press
'Select' with the right arrow button on the device.
Now the test will start with the first phase (warm-up), and the
screen returns to the Home Screen, with a countdown in the left
bottom corner displaying the remaining warm-up time.
D 8.4.1.20 O
matic User Manual - IFU
46
2