Doubletracker Boost / Cut - Strymon DECO User Manual

Deco
- tape saturation & doubletracker
Live Edit Functions

Doubletracker Boost / Cut

Adjusts the amount of volume increase or decrease, +3dB or -3dB,
applied to the Doubletracker, when enabled, to allow for precise level
matching�
1 Press and hold the TAPE SATURATION ON footswitch to enter Live
Edit mode� Once both LEDs flash, release the footswitch�
2 Turn the BLEND
the Doubletracker level� Both ON LEDs indicate your selection from
GREEN (-3dB cut) to
Default is set at the 12 o'clock position for unity gain, where no cut
or boost is applied�
3 Press either footswitch to exit and store your Doubletracker Boost/
Cut setting�
NOTE: The Doubletracker Boost/Cut setting is saved per Favorite setting or
per MIDI preset�
(DOUBLETRACKER
AMBER (+3dB boost)�
BOOST/CUT) knob to adjust
pg 13