Midi & Jack Options - Strymon DECO User Manual

Deco
- tape saturation & doubletracker
Power Up Modes Quick Reference
Global parameters and functions can be accessed via a power up proce-
dure� All power up functions persist through power cycles�
MIDI & Jack Options
1 Press and hold the TAPE SATURATION ON footswitch while power-
ing up Deco� Once both LEDs flash, release the footswitch�
2 Adjust the desired functions with the knobs and buttons noted below�
3 Press either footswitch to store your changes and exit power up mode�
EXP/MIDI JACK
MODE
See page 19
for an illustrated
description�
MIDI CHANNEL
See page 29
for an illustrated
description�
MIDI OUT MODE
See page 31
for an illustrated
description�
Turn LAG TIME knob - status shown on DOUBLETRACKER ON
LED
• Expression: GREEN
• Favorite: AMBER
• Tap: RED
• MIDI: BLUE
Turn SATURATION knob - status shown on TAPE
SATURATION ON LED
• 1: GREEN (default)
• 2: AMBER
• 3: RED
• 4-16: BLUE
(channel set by next received MIDI PC
message)
Turn TONE knob - status shown momentarily on both LEDs
• OFF: RED (default)
• THROUGH: BLUE
• ON CC PC OTHER: WHITE
• ON CC OTHER:
• ON PC OTHER:
• ON OTHER: AMBER
(cont.)
(default)
GREEN
PURPLE
pg 43