Strymon DECO User Manual page 30

Deco
- tape saturation & doubletracker
STEP 2 – SET MIDI CHANNEL
4 Press either footswitch to exit and store your MIDI Channel setting
and begin using Deco�
NOTE: A simple way to check that communication is working is to send CC
#10 with a value of 127 when the TAPE SATURATION footswitch is off� This
will turn the TAPE SATURATION footswitch LED on if MIDI is properly con-
nected and configured�
NOTE: If you are only sending data to Deco using the Strymon MIDI EXP
Cable, the MIDI OUT mode must be set to OFF� (See
configuring the MIDI OUT Mode�)
NOTE: MIDI Channel assignment is not saved per Favorite setting or MIDI
preset�
(CONT�)
page 31
for details on
pg 30