Using Multiswitch Plus; Saving Deco Presets With Multiswitch Plus - Strymon DECO User Manual

Deco
- tape saturation & doubletracker
External Control

Using MultiSwitch Plus

Selecting and saving Deco presets using MultiSwitch Plus�
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to MIDI
Program Changes 1, 2, and 3�
1
Step on a switch that is not illuminated to recall its corresponding
preset�
2 Step on an illuminated switch to bypass Deco�

Saving Deco Presets with MultiSwitch Plus:

1
Dial in the sound that you would like to save as your preset on Deco�
2
Press and hold both footswitches on Deco until both the LEDs blink
GREEN�
3 Press the A, B, or C footswitch on MultiSwitch Plus to save the cur-
rent state of the pedal to the desired location�
Preset 1 Preset 2 Preset 3
pg 26