Two Year Warranty - Stanley SCD121 Manual

ENGLISH (
Original Instructions)
VIBRATION
The declared vibration emission values stated in the
technical data and the declaration of conformity have been
measured in accordance with a standard test method
provided by EN 62841 and may be used for comparing one
tool with another. The declared vibration emission value
may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The vibration level may increase
above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation of
vibration exposure should consider, the actual conditions of
use and the way the tool is used, including taking account
of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition
to the trigger time.
EC declaration of conformity
MACHINERY DIRECTIVE
SCD121 - Drill driver
STANLEY declares that these products described
under "technical data" are
2006/42/EC,EN62841-1:2015 , EN62841-2-1:2018
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back of
the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
Stanley, Egide Walschaertsstraat 14-18
12
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts free of charge or – at our discretion – replace the unit
free of charge provided that:
•
•
•
•
•
•
If you wish to make a claim, contact your seller or check
the location of your nearest authorised STANLEY repair
agent in the STANLEY catalogue or contact your local
STANLEY office at the address indicated in this manual. A
list of authorised STANLEY repair agents and full details
of our after sales service is available on the internet at:
www.2helpU.com
in compliance with:
Patrick Diepenbach
General Manager, Benelux
2800 Mechelen, Belgium
12.19.2021

TWO YEAR WARRANTY

The product has not been misused and has been used
in accordance with the instruction manual;
The product has been subject to fair wear and tear;
Repairs have not been attempted by unauthorized
persons;
Proof of purchase is produced.
The STANLEY product is returned complete with all
original components
The product hasn't been used for hire purposes