Two Year Warranty - Stanley STDR5510 Original Instructions Manual

Level of sound pressure according to EN 60745:
Sound pressure (L )
pA
Sound pressure uncertainty (K
Sound power (L )
WA
Sound power uncertainty (K
WA
Vibration emission value a
Main handle (a ) =
h
Uncertainty (K) =
VIBRATION
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured in
accordance with a standard test method provided by EN 60745
and may be used for comparing one tool with another. The
declared vibration emission value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used. The vibration level may increase above
the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
dB(A)
) dB(A)
pA
dB(A)
) dB(A)
check (Drilling)
h
m/s² 5.1
m/s² 1.5
EC declaration of conformity
84
3
95
3
STDR5510C - Rotary Drill
STANLEY declares that these products described under
"technical data" are in compliance with:2006/42/EC, EN
60745-1, EN 60745-2-6
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
STANLEY , Europe, Egide Walschaertsstraat14-18,

TWO YEAR WARRANTY

If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all original
components;
• The product hasn't been used for hire purposes.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at: www.2helpU.com
(Original instructions)
MACHINERY DIRECTIVE
Engineering Manager
2800 Mechelen, Belgium
ENGLISH
R.Laverick
09.2014
7