Ec Declaration Of Conformity; Two Year Warranty - Stanley SCH12S2K Original Instructions Manual

ENGLISH
(Original instructions)

EC declaration of conformity

MACHINERY DIRECTIVE
SCH12 - Hammer Drill
STANLEY declares that these products described under
"technical data" are in compliance with;2006/42/EC, EN
60745-1:2009 + A11:2010, EN 60745-2-1:2010 EN
60745-2-2:2010
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
STANLEY , Europe, Egide Walschaertsstraat14-18,
12
R.Laverick
Engineering Manager
2800 Mechelen, Belgium
01.2016

TWO YEAR WARRANTY

If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all original
components;
• The product hasn't been used for hire purposes.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at: www.2helpU.com