Three-Year Limited Warranty; Troubleshooting - Stanley FatMax FMC010 Instruction Manual

• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment. This Class B
digital apparatus complies with Canadian ICES-003.
THREE YEAR LIMITED WARRANTY
Stanley FatMax will repair or replace, without charge, any defects due to faulty materials
or workmanship for three years from the date of purchase for tools (two years for batteries).
This warranty does not cover part failure due to normal wear or tool abuse. For further
detail of warranty coverage and warranty repair information, visit
www.stanleytools.com or call (800) 262-2161. This warranty does not apply to
accessories or damage caused where repairs have been made or attempted by others.
This warranty gives you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, Stanley FatMax tools are covered by our:
1 YEAR FREE SERVICE: Stanley FatMax will maintain the tool and replace worn parts
caused by normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE: If you are not completely satisfied with the
performance of your Stanley FatMax Power Tool for any reason, you can return it within
90 days from the date of purchase with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, see country specific warranty information contained in
the packaging, call the local company or see website for warranty information.
To register your tool for warranty service visit our website at www.stanleytools.com
WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call (800) 262-2161 for a free
replacement.
Problem
• Unit will not start.
• Battery pack will
not charge.
• Unit shuts off abruptly.
For assistance with your product, visit our website at www.stanleytools.com for a list of
service centers, or call the Stanley FatMax Customer Care Center at (800) 262 2161.
Possible Cause

Troubleshooting

• Battery pack not installed
properly.
• Battery pack not charged.
• Battery pack not inserted into
chargr.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
• Battery pack has reached its
maximum thermal limit.
• Out of charge. ( To
maximize the life of the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
Imported by
Stanley Tools
701 E. Joppa Road
Towson, Maryland 21286
Possible Solution
• Check battery pack
installation.
• Check battery pack charging
requirements.
• Insert battery pack into
charger until green LED appears.
• Plug charger into a working
outlet. Refer to "Important
Charging Notes" for more details.
• Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4.5°C) or below 105
degrees F (+40.5°C).
•Allow battery pack to cool
down.
• Place on charger and
allow to charge.
12