Service Information; Two Year Warranty - Stanley SBD20 Original Instructions Manual

ENGLISH
(Original instructions)
Charger
Input voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time Mins
Battery SB20C
Voltage V 18
AC
Capacity Ah 1.3
Type Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L ) 72 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 83 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a ) 1.7 m/s
h, D
Screwdriving without impact (a
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured in
accordance with a standard test method provided by EN 60745
and may be used for comparing one tool with another. The
declared vibration emission value may also be used in a
preliminary assessment of exposure.
Warning! The vibration emission value during actual use of the
power tool can differ from the declared value depending on the
ways in which the tool is used. The vibration level may increase
above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.

SERVICE INFORMATION

STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers are
staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact
the STANLEY location nearest you.
10
SC201 SC202
220-240 220-240
18 18
1000 2000
80-240 40-120
SB20S SB20D SB20M
18 18 18
1.5 2.0 4.0
Li-Ion Li-Ion Li-Ion
2 , uncertainty (K) 1.5 m/s 2
) 1.0 m/s 2 , uncertainty (K) 1.5 m/s
h
EC declaration of conformity
MACHINERY DIRECTIVE
SBD20- Drill / Screwdriver
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC, EN
60745-1:2009 + A11:2010, EN 60745-2-1:2010
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
2
STANLEY , Europe, Egide Walschaertsstraat14-18,

TWO YEAR WARRANTY

If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced.
• The STANLEY product is returned complete with all original
components
• The product hasn't been used for hire purposes
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at: www.2helpU.com
R.Laverick
Engineering Manager
2800 Mechelen, Belgium
01.2017