Midi Clock Sync - Strymon DIG User Manual

DIG
- dual digital delay
Live Edit Functions

MIDI Clock Sync

Selects whether the delay time for Delay 1 will sync to incoming MIDI
Clock messages�
1 Press and hold the ON footswitch� Once both LEDs flash, release the
footswitch�
2 Set the position of the TYPE
whether DIG will sync to incoming MIDI Clock messages� Both LEDs
will momentarily change color to indicate the current status as you
set the switch�
• Set the switch down to 12 bit for Off (default): both LEDs light
- DIG will not respond to MIDI Clock�
• Set the switch up to 24/96 for On: both LEDs light
respond to MIDI Clock�
NOTE: When synced to MIDI Clock, the LEDs will light PINK, and the TIME
knob will act as a multiplier or divider of the incoming clock tempo� The
synced TIME mult/div settings are: x4 (min), x3, x2, x1 (at 12 o'clock), 1/2,
1/3, and 1/4 (max)�
3 Press the ON footswitch to exit and store your MIDI Clock setting�
NOTE: The MIDI Clock setting is saved per Favorite setting or per MIDI preset�
(MIDI CLOCK SYNC) switch to select
RED
BLUE - DIG will
pg 15