Where To Be Careful; Washing - Triumph Street Triple S Owner's Handbook Manual

Where to be Careful

Caution
Do not use high pressure spray
washers or steam cleaners.
Use of high pressure spray washers
and steam cleaners may damage
seals, and cause water and steam to
be forced into bearings and other
components causing premature wear
from corrosion and loss of lubrication.
Caution
Do not spray any water at all near the
air intake duct.
The air intake duct is located under
the rider's seat, under the fuel tank or
near the steering head.
Any water sprayed in this area could
enter the airbox and engine, causing
damage to both items.
Do not get water near the following
places:
▼ Air and any intake duct
▼ Any visible electrical components
▼ Brake cylinders and brake calipers
▼ Handlebar switch housings
▼ Headstock bearings
▼ Instruments
▼ Oil filler cap
▼ Rear bevel box breather (if fitted)
▼ Rear of headlights
▼ Seats
▼ Suspension seals and bearings
▼ Under the fuel tank
▼ Wheel bearings.
CLEANING AND STORAGE

Washing

To wash the
following:
▼ Make sure
engine is cold.
▼ Prepare a mixture of clean, cold
water and mild automotive cleaner or
low alkaline soap.
▼ Do not use a highly alkaline soap as
commonly found at commercial car
washes because it will leave a
residue on painted surfaces and may
also cause water spotting.
▼ Wash the motorcycle with a sponge
or soft cloth.
▼ Do not use abrasive scouring pads or
steel wool. They will damage the
finish.
▼ Rinse the motorcycle thoroughly
with clean, cold water.
motorcycle, do
that the motorcycle
197
the