Information Tray - Triumph Street Triple S Owner's Handbook Manual

GENERAL INFORMATION
68
Reset to Defaults
The Reset to Default option allows the
Main Menu display items to be reset to
the default setting.
To reset the Main Menu display items:
▼ From the Main Menu, push the
joystick down and select RESET TO
DEFAULTS.
▼ Push the joystick down/up to select
CONFIRM
joystick
selection.
▼ Confirm - The following main menu
settings and data will be reset to the
factory default
Modes,
Computers, Visible Trays, Language,
Traction
Brightness, Lap Timer settings and
data.
▼ Cancel - The main menu settings and
data will remain unchanged and the
display will return to the previous
menu level.
RESET TO DEFAULTS
CONFIRM
CANCEL
BACK EXIT SELECT
or CANCEL. Press
centre to confirm
values -
Indicator Set Up,
Control, Style,

Information Tray

When the motorcycle is in motion, only
attempt
information tray modes or reset the
fuel information under the following
conditions:
- At low speed
- In traffic free areas
- On straight and level roads or
surfaces
- In good road and weather conditions.
Failure to observe this important
warning
motorcycle control and an accident.
the
Note
the
To access the information tray, the
warning
acknowledged, see page 69.
The information tray appears in the top
Riding
section of the display screen for styles
Trip
01, 02 and 03. It appears on the left
hand side of the display screen for style
Display
04. It allows easy access to different
motorcycle status information.
To view the different information tray
items, push the joystick left/right until
the required information tray item is
shown.
Warning
to switch between
could lead to
messages must
the
loss of
first be