Extender Tx - Eaton XP-504-10-A10-A01-2B Manual

3. Installation
3.4 Mounting

3.4.3 Extender TX

56
Rail mounting
A mounting bracket is used for vertical installation on the 35-mm IEC/EN 60715 DIN-
rail in the control cabinet.
Engage the DIN-rail with the device with the power supply facing up.
Snap the spring mechanism into place on the DIN-rail.
To do this, push down on the mounting clamp spring and push the bottom of the
XP-504-EXT module onto the DIN-rail.
Check to make sure that the device is securely mounted on the DIN-rail.
XP-504 04/2022 MN048028EN Eaton.com
M4
2.2 Nm
(19.47 lb-in)
M4
2.2 Nm
(19.47 lb-in)
1
2