Table of Contents
Advertisement
3. Installation
CAUTION
Installation requires qualified electrician
CAUTION
ELECTROSTATIC DISCHARGE
Do not touch components (e.g., connector pins) that are elec-
trostatic-sensitive.
Discharge any static electricity from your body before touching
the XP-504 (e.g., by touching an earthed metal object).
Electrostatic discharges may damage or ruin assembly parts.
Because of this, it is necessary to take precautions whenever hand-
ling the XP-504 cards.
Please refer to the guidelines for electrostatic-sensitive components
for more information (ESD guidelines).
ATTENTION
Arrange for an electrician to install and connect the power supply.
The controls and connectors must remain accessible even after the device has
l
been installed.
No direct sunlight on the devices.
l
CAUTION
UV LIGHT
Plastics will become brittle when exposed to UV light. This artificial
aging will reduce the XP-504 unit's lifespan. Protect the XP-504 series
devices from direct sunlight and other sources of UV radiation.
Make sure that the XP-504 devices do not overheat.
l
The minimum clearance to components that radiate heat, such as transformers
l
under heavy loads, is 15 cm.
The controls and connectors must remain accessible even after the device has
l
been installed.
XP-504 04/2022 MN048028EN Eaton.com
3. Installation
39
Advertisement
Table of Contents
