Safety Regulations; Basics; Mandatory Requirements, Personnel Requirements; Occupational Safety - Eaton XP-504-10-A10-A01-2B Manual

Table of Contents

2. Safety regulations

XP-504 devices have been designed according to the state of the art and all generally

accepted safety rules and standards. However, this alone cannot eliminate all poten-

tial hazards, which is why it is necessary for you to be aware of all hazards and resi-

dual risks.

Do not run any XP-504 device unless it is in perfect technical condition. Make sure to

always operate it as specified in this document and as intended.

Follow the safety instructions for the XP-504!

The section on safety instructions must be read and understood by

everyone who will be working with the XP-504 before the actual work

is performed Human-machine interface.

ATTENTION

Pay attention to the hazard severity levels used throughout this docu-

mentation whenever a hazard is indicated. The hazard symbol and

signal word used and the corresponding text will provide information

regarding the specific hazard and how to avoid or prevent it.

All generally accepted occupational health and safety rules and standards (internal

and national) must be complied with, as must be all applicable laws and regulations

in the relevant country.

The personnel responsible for installation, operation, maintenance, and repairs must

have the necessary qualifications for the work they will be performing. They must be

appropriately trained and/or briefed and be informed of all hazards and risks asso-

ciated with the device.

XP-504 04/2022 MN048028EN Eaton.com

2. Safety regulations

2.1 Basics

Table of Contents