Approvals And Declarations - Eaton XP-504-10-A10-A01-2B Manual

Table of Contents

Advertisement

A.1.5 Approvals and declarations
Approvals anddeclarations
CE
The XP-504 devices comply with all applicable European Union (EU) Directives and fea-
ture the CE marking.
UKCA
XP-504 devices are conform to the applicable regulations in the United Kingdom
UL
Currently only applies to Panel-PC:
cULus (UL 61010-2-201) certification, UL File No. E205091
Explosion protection
Currently only applies to Panel-PC:
(relevant for CE)
II 3D Ex tc IIIC T70°C U (U = Marking for hazardous location components; see EN 60079-
0:2012+A1:2013, 29.9g) Zone 22, Category 3D
Special conditions for safe use („U")
Panel-PC is designed for installation in the front of enclosures in protection type "tc"
(alternatively "ta" or "tb"). This installation must be tested and certified separately.
The maximum surface temperature at the outer surface is set to 70°C at the maximum
ambient temperature of 45°C.
For safe installation, comply with the specification to holding brackets and tightening
torque in the Instruction Leaflet IL048016ZU.
2011/65/EU and 2015/863/EU RoHS Directive
2014/30/EU EMC Directive
2014/34/EU ATEX Directive
2011/65/EU and 2015/863/EU RoHS-Directive
2014/30/EU EMC-Directive
2014/34/EU ATEX-Directive
The requirements are evaluated on the basis of the following standards:
EN 61000-6-4:2007/A1:2011
EN 61000-6-2:2005/AC:2005
EN 61131-2:2007
Applied standards and directives
EMC (relevant for CE)
RoHS
Explosion protection (relevant for CE)
EN 61000-6-
4:2007/A1:2011
EN 61000-6-
2:2005/AC:2005
EN 61131-2:2007
Security
UL 61010-2-201,
CSA C22.2 No. 142-
M1987
DIN EN 60529
NEMA 250-2003
Product standards
DIN EN 60898-
1:2006-03
EN 50178
IEC/EN 61131-2
XP-504 04/2022 MN048028EN Eaton.com
2014/30/EU EMC Directive
-compliant 2011/65/EU and 2015/863/EU RoHS Directive
2014/34/EU ATEX Directive
Electromagnetic compatibility (EMC) - Part 6-4: Generic
standards - Emission standard for industrial environments
Electromagnetic compatibility (EMC) - Part 6-2: Generic
standards - Immunity for industrial environments
Programmable controllers - Part 2: Equipment require-
ments and tests
Industrial Control Equipment
→ Section "Conditions for Underwriters Laboratories Inc.
(UL) listing ", page 24
Degrees of protection provided by enclosures
NEMA Standard Enclosures for Electrical Equipment
(1000 Volts Maximum)
Electrical accessories - Circuit-breakers for overcurrent
protection for household and similar installations
Electronic equipment for use in power installations
Programmable controllers: Equipment requirements and
Appendix
A.1 Technical data
127

Advertisement

Table of Contents
loading

Table of Contents