Table of Contents
Advertisement
3.4.2.2 Mounting wall
CAUTION
Arrange for a professional technician to mount the device if you are
using this alternative mounting solution with the wall mount.
CAUTION
The cabinet mounting wall in which the Box-PC is installed must be
able to bear four times the device weight, including the cor-
responding retaining elements.
The two enclosed mounting plates are identical and are included in the equipment
supplied with the Box-PC together with the required four M3x5 (3/16") TORX T10 A2
ISO14583.
Use both mounting plates.
Tighten each M3x5 (3/16") TORX T10 A2 ISO14583 with a torque of 0.4 Nm (3.54
lb-in).
For mounting on the mounting wall, you will need to use M4 screw assemblies
through the mounting plates.
Make sure to use both mounting points.
Tighten each M4 screw assembly with a torque of 2.2 Nm (19.4716 lb-in).
XP-504 04/2022 MN048028EN Eaton.com
T 2
M3x5
0.4 Nm
(3.54 lb-in)
3. Installation
3.4 Mounting
55
Advertisement
Table of Contents
