Mounting; Mounting With Mounting Kits - Festo EXCT Series Operating Instructions Manual

Assembly
6.3

Mounting

6.3.1

Mounting with mounting kits

1
2
3
1
Fig. 10: Mounting with mounting kits, EXCT-15 as an example with motor attachment positions at the
front
1
Transport mount for lifting gear
2
Mounting kit
On delivery of the product the required number of mounting kits are fastened to the backwall of the
Y-axis with slot nuts.
In the delivery status the axis locks mounted on the product prevent movement of the Z-axis. To move
the Z axis è 6.5.1 Manually moving the Z-axis
Procedure
1. Observe the safety instructions è 2.1 Safety instructions.
2. Remove the transportation locks è 6.2.7 Removing transportation locks.
CAUTION
Risk of injury from the product tipping or falling.
• Place the product on stable bases, e.g. mounting tables, and secure it to prevent it from tipping
or falling.
NOTICE
Risk of damage to the Z-axis if subjected to stress.
• Do not subject the interface or Z-axis to stress when handling and positioning the product.
Festo — EXCT — 2022-03a
3
Slot nut, 4x per mounting kit
19