Table of Contents
Advertisement
Fasten the user system interface cable head to the IC socket for an FP-32A package on the user
system with the two screws (M2
time, alternating between screws on opposing corners. Take special care, such as manually
securing the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
Figure 4 Connecting User System Interface Cable to User System
8
10 mm) provided. Each screw should be tightened a little at a
x
Pin 1
User system
Screws (M2 x 10 mm)
Cable head
IC socket
(NQPACK032SA
manufactured by
Tokyo Eletech Corporation)
Advertisement
Table of Contents
